COMMERCIAL USE SWINGING DOOR OPERATOR

www.hunterautomatics.com

The Hunter Automatics FA-8 Automatic Door operator is used for high traffic, commercial applications. The operator can be interfaced with all activation devices by supplying a 24 Volt power supply and a trigger for activation signals. The control has a built in lock-out relay for safety sensors. Both overhead and door mounted safety sensors can be interfaced to the FA-8 control through two separate inputs.

The Hunter Automatics FA-8 operator has several characteristics that ensure its reliability and longevity. The operator housing is cast aluminum and includes a heavy-duty spring assembly to provide the appropriate opening and closing force. The motor is a 1/7 HP that provides substantial torque for any type of application. The aluminum Header is a slim 4 ½" wide design making concealed application visually appealing. Surface applied applications can be mounted on either side of a door frame providing flexibility in any situation.

The control has several adjustments including, opening speed, 2-20 second activation time delay, backcheck speed, closing speed, latching speed, and hold time (decreases strain on motor during hold open). Three stock finishes are available, clear anodized, dark bronze and light bronze, other anodized and painted finishes are available upon request.

Advanced Mechanics
The FA-8 operator incorporates an adjustable external stop, making changes of spring tension site adjustable.

Advanced Electronics
Built in lockout relays for overhead and door mounted safety sensors.

Advanced Design
Spring loaded components allow for quick and easy adjustment of backcheck and latch points, therefore no hand tools are necessary.

Quiet Operation
The HA-8 operator is noise free in both automatic and manual mode for a pleasant, consumer friendly environment.